Main page » Products » Drinking water treatment » MMS-Water-Filter » MMS-Water-Filter complete set

MMS-Water-Filter complete set

Mobile Preview: MMS-Water-Filter complete set

MMS-Water-Filter complete set

Product No.:: 1906756
Shipping time:: ca. 3-4 days (abroad may vary)
Stock:: 7 pieces

283,69 EUR

incl. 21% tax excl. Shipping costs

Description

Modell 2003
Powerful drinking water filter for household use

The MMS-Water-Filter is a powerful, multi-stage drinking water filter for households with only 0.1 micron pore size. He has an innovative Micro-Membran-System (MMS) and ensures deep, pure drinking water quality and a refreshing taste. The MMS-Water-Fllter does not need electricity, no waste water, no chemicals and no decalcifying - so it is very environmentally friendly. The mineral content (especially magnesium and calcium) and the pH value are retained. Its almost 100% filter capacity was impressively confirmed by 2 German laboratories. The MMS-Water-Filter is quickly mounted and holds up to 12 months or 11,200 liters. Buy now online a MMS-Water-Filter for wonderfully refreshing, vitalizing and energizing drinking water.

Powerful drinking water filter for household
with innovative micro-membrane system 0,1 micron

Water is life - and our most important food. Although residues of more than 50,000 substances can be found in drinking water, there are only a handful of limit values â€‹â€‹and even less legal provisions. Sewage treatment plants can not remove all loads. Even if the water suppliers feed clean and germ-free water into the municipal pipeline, it is not guaranteed that it will come out of your tap at the end of the pipeline. For this reason, a profound filtration just before the sampling point is useful to protect the health of your family. The MMS-Water-Filter is a three-stage drinking water filter with top performance and a hygienic quick-change system. The filter mechanically removes substances and suspended matter such as asbestos fibers greater than 0.1 micron. Thus, the filter is up to 50 times more thorough than conventional devices with 5 micron pore size. In addition, the MMS-Water-Filter filters chlorine and chlorine compounds (CFCs), organic compounds such as pesticides and pesticide residues, herbicides, insecticides, drug residues, hormones and hormone-like substances, odors, discolourations, metals and heavy metals (e.g., lead, iron and copper). It can also largely remove micro-plastic beads, aluminum (geo-engineering), as well as glyphosate and glyfosinate, which have recently been found in drinking water. The micro-membrane system (MMS) also allows effective removal (99.9999%) of bacteria, fungi and parasites and makes the water microbiologically pure.

Stage I: Anti-lime activator

First, the water passes through a food-safe mineral mix. This protects water cookers, coffee and tea machines from stubborn limescale deposits. In addition, the structure of the water is altered such that the subsequent filter stage is e.g. Heavy metal. Moreover, this stage can almost halve the nitrate content of the water. This is exceptional for a carbon block filter.

Stage II: activated carbon block

The filter material of the second stage consists of activated charcoal produced from coconut husks (renewable raw material). While many activated charcoal filters are in a loose bed, the MMS-Water-Filter uses an extremely compressed compression. This is the only way to achieve the enormously wide-band filter effect, with a high water flow of almost 5 liters per minute. This active carbon block has equal 3 mechanisms of action:

1. Screen effect: The fine pores act like a screen and retain larger contents (such as sand, rust, asbestos fibers, suspended particles and also bacteria and unicellular parasites) in the water. Many filters have only one carbon block with a 5 micron pore size, a few offer 1 micron, and the better even 0.8 micron pore size. Our MMS-Water-Filter has a pore size of only 0.3 micron and thus forms a surface of several hundred football fields (!!!). This long way vitalizes and energizes the water and leads among other things. To the refreshing taste.

2. Adsorption: Many substances such as lead, copper, fungicides, pesticides and herbicides, but also drug and hormone residues, which could pass through the pores, are attracted by atomic forces of the activated carbon (van der Waals forces) as by a magnet and permanently fixed. This also applies to substances which lead to an unpleasant taste or smell. The filter increases with time and thus consumes.

3. Catalyst Action: Activated carbon is also a highly active catalyst. It promotes chemical transformation processes without being consumed by itself. For example, The dangerous chlorine compounds, chlorinated hydrocarbons and chlorinated hydrocarbons (CFC) are removed from the water.

Stage III: Micro-Membrane-System

After the active carbon block, a new micro-membrane system (MMS) with a pore size of only 0.1 micron forms the third and most thorough filter stage. Only very few filters of the reference class have such a fine pore size. Here, all suspended particles and the smallest bacteria, fungi and parasites are safely restrained.

Flower of life: harmonizing and energizing

Now the water is physically freed from all impurities. In order to erase the information of these impurities, we have applied the "Flower of Life" to the filter in the 7 chakras. This can harmonize and energize the water. See also our "Flower of Life" coaster set.

Laboratory results of filter performance:

Our MMS-Water-Filter has been subjected to extensive hardening tests in two German independent laboratories. In the laboratory for residue analysis Bremen, the water in front of the filter was deliberately contaminated with high amounts of pesticides and elements. Behind the filter it was measured how much per cent these impurities could be filtered out. Almost all pesticides, fungicides and herbicides (glyphosate and glyfosinate) could be filtered out 100%. Even the currently discussed nitrate could be reduced by 44%. The laboratory was surprised that a carbon filter of this building class could filter nitrate at all and confirmed this in a second measurement. Heavy and light metals were also filtered out to almost 100%. However, the minerals important for drinking water such as calcium and magnesium as well as the pH remained intact. Finally, it was investigated whether the filter materials used themselves discharged substances (for example silver, ruthenium and polycyclic aromatic hydrocarbons) into the water. These were not detectable. The second laboratory at Q-Bioanalytic was about how well the filter was able to filter highly germinated water. For this purpose, old, brackish and completely contaminated and polluted aquarium water was used as the starting water. According to DIN EN standards for drinking water, water was taken from the filter, cultures were cultivated and these were then examined. The MMS-Water-Filter produced an amazing reduction of 99.35% almost drinking water quality. Both extreme hardening tests have used a load up to 100 times higher than in drinking water to measure the maximum filter capacity. When using the domestic drinking water pipeline, a nearly 100% filter capacity should be assumed.

Top prize / performance ratio:

The MMS-Water-Filter not only has excellent filter performance, but also has a filter capacity that is twice as high as conventional filters. Therefore it has to be dived only approximately every 12 months or after an average of 11,200 liters. Both together lead to the probably lowest running costs on the market: 1 liter of refreshing drinking water for only about 1ct = 0.01 €. You have almost 1,000 liters per month available. This is generally enough for a family of four as pure drinking water, for coffee and tea, for the extensive washing of fruits and vegetables, for the cooking of food, for the pets and the flowers.

Environmentally friendly:

The MMS-Water-Filter is very environmentally friendly in several respects. It does not consume electricity, does not require chemicals, does not produce waste water, e.g. Reverse osmosis systems and also does not require elaborate descaling. In addition, more than twice the capacity of conventional filters leads to more than 50% less waste, less transport costs and exhaust fumes per year.

Technical specifications:

Max. Flow rate: 4.5 l / min (with new cartridge)
Max. Pressure: 8.0 bar
Temperature: min. 3 ° C - max. 38 ° C
Filter capacity: 11,200 liters or max. 1 year * 1
Cartridge: Anti-lime activator, sintered active carbon block 0.3 μm and micro-membrane system 0.1 μm
Connection: 3/8 "

Conformity:

EU Regulation 10/2011, European Directive 98/83 / CE, DM 25/2012, DVGW (W543), KTW-A, W270. Our filter complies fully with the EU guidelines for materials that come into contact with food and drinking water.

Application:

The MMS-Water-Filter may only be operated on the drinking water line! It is usually installed in the kitchen under the sink. It can be installed between the cold water supply and does not need an additional tap for the drinking water. Alternatively it can also be connected to a separate faucet (not included). The installation takes only 5 - 10 minutes, a filter change is done in 1 minute hygienically.

Content of Delivery:

1x filter cartridge (L = 370mm, ø = 88mm), sealed
1x filter head 3/8 "with wall holder and installation instructions
2x hoses (3/8 ") with backflow preventer and seals

Installation dimensions of the complete set:

390mm x 95mm x 95mm

Disclaimer:

The installation is easy and fast. Nevertheless, for insurance reasons, we recommend the first installation by a craftsman or specialist! The manufacturer is not liable for damage and consequential damage resulting from improper installation or modification! The annual filter changes can then be done without a specialist. The triangles on top of the filter head indicate the water flow direction. Failure to do so may damage the filter!

Important customer information
Our water filter has no influence on the pH value, the mineral content or the electrical conductance of the filtered water!
The water filter is a hygiene product and can not be taken back after unsealing or installation!
For questions about installation, please contact our email support BEFORE!

* 1 Attention: The MMS-Water-Filter requires regular periodic maintenance! To ensure a consistent drinking water quality, the filter cartridge should be changed every 12 months or after 11,200 liters. The stated capacity and capacity depends on the water quality and the local water pressure and can vary. When the flow has dropped sharply, the end of the filter capacity is reached and a change of the cartridge is necessary. The old cartouche can be disposed of with household waste. Changes and errors excepted.

TARIC-No 84212100

Questions and answers

1. Is the lime completely filtered out?

NO! In the first mineral mix stage, our water filter changes the consistency of the lime using the commercially available ion exchange process. Thus, instead of large and stubborn lime deposits, only easily wiped off lime dust is formed. Unfortunately, our filter cannot do magic in areas with an extremely high lime content. The quantities are simply too large. Even special limescale filters use resin salts, which then have to be replaced several times a year in a complex and expensive process. These limescale filters also reduce the flow of water very strongly. Our drinking water filter is mainly used to clean the tap water from heavy metals, bacteria, viruses, microplastics, medication residues and unpleasant odours.

CONCLUSION: Our filter is not a special lime filter!

2. What is the electrical conductivity of the filtered water?

These and similar questions reach us again and again. It is assumed that an electrical TDS meter can make reliable statements about the quality of drinking water for about 25€. The TDS (Total Dissolved Solids) value indicates the sum of dissolved solids (e.g. minerals, salts, metals) in water. The unit commonly used is mg/l (milligram per litre) or PPM (Parts Per Million). The device displays the electrical resistance either directly in microsiemens (µS) or converts it into the PPM value (2 µS/cm = 1 ppm). Both values only say something about the number of dissolved solids in water that are conductive. The higher the conductivity of the water, the higher the measured value. This is not a chemical analysis of the water according to its exact ingredients. Therefore, these are purely quantitative measurements that say nothing about the quality of the water. Whether harmless sodium, calcium, magnesium or e.g. toxic arsenic, lead or uranium makes a difference for your body. Especially residues of hormones, pesticides and fungicides do not conduct electricity and cannot be measured by a conductivity meter! Crush a paracetamol tablet once and stir it into a glass of water. You will not measure any difference, even though the water is now extremely contaminated with drug residues. On the other hand, just a small pinch of table salt in a glass of water will sound the alarm wrongly.

Dubious sales statements
Suppliers of osmosis plants often use a TDS meter to convince prospective customers that their own tap water makes them ill. It is claimed that the device measures the pollutants in the water. Only water with a very low value below 100 µS is said to be beneficial to health. The digital measured value is therefore a guide value for the quality of the water. However, the measured value only indicates how conductive the water is. Only osmosis water has a low conductivity value. This is solely due to the fact that osmosis water contains no or very few minerals and is therefore no longer conductive. In the meantime, some manufacturers of osmosis systems have recognised that "empty" water tastes unpleasant and is not beneficial to health. Therefore, most of them have now built in a remineralisation stage. But if this would work, the conductivity would be as high as before.

Minerals are important flavour carriers
Minerals belong in natural spring water and form its character. They give the water its typical regional flavour. Whether a water contains many or few minerals depends exclusively on the region and is not a sign of its quality. There are waters full of character and lighter waters.

What does the German Drinking Water Ordinance say about the conductivity value?
In the worldwide very strict German Drinking Water Ordinance (TrinkwV), the electrical conductance is only mentioned in connection with the corrosion of the pipes. If the mineral content is too high, a current can flow between noble and base metals in the pipes and cause them to rust.

What does the WHO say about the guide value?
Statements that water with high TDS levels is unhealthy are not confirmed by the WHO. In the WHO guidelines (WHO/SDE/WSH/03.04/16, Total dissolved solids in Drinking-water, Background document for development of WHO Guidelines for Drinking-water Quality) it is summarised that there are no reliable studies that confirm the relationship between the TDS value and the health effects of water. Water with too low a TDS value is often described as having an unpleasant taste and is just as problematic as water with a value above 2,000 µS.

CONCLUSION: The TDS conductance in PPM or Mikrosiemens µs can NOT make a statement about whether a water is healthy or not! For this reason we do not give any information on the conductance.

3. What is the pH value of the filtered water?

The pH value indicates the concentration of free hydrogen ions in an aqueous solution. The measuring scale of the pH-value ranges from 1 to 14, whereby all values below 7 are always more acidic and all values above 7 are always more basic. The value 7 is considered neutral. Drinking water normally has a neutral (7) to slightly alkaline pH value (8.5). The German Drinking Water Ordinance stipulates a pH value between 6.5 and 9.5 as a guideline value.

Influence of the pH-value on the human body
Our body needs a precisely balanced interplay of acids and bases to effectively control all metabolic processes. Unfortunately, modern nutrition is very pH-sour. The pH-value of cola, for example, is 2-3. The idea of drinking alkaline water probably originally came from Japan/Korea. Kangan water was invented there and used to treat diseases. Nevertheless, this should be seen as a temporary therapeutic and not as everyday drinking water. It should also only be drunk at certain times. Alkaline water at main meals would neutralize the stomach acid which is important for our immune system. This would considerably weaken our digestion. There are therefore better ways to deacidify, e.g. through breathing techniques, alkaline baths and the right diet. Some well-known healing springs may have slightly alkaline water, but life with all its diversity has successfully spread not only around these healing springs, but everywhere. It is a fact that nature does not have such extremes with its drinking springs, but water near the neutral pH value is often found in nature. This is what humans, animals and plants have been getting along with for centuries. Therefore this is probably the solution for everyday needs.

CONCLUSION: Our filter does NOT change the pH value of the filtered water!

4. What is the mineral content of the filtered water?

This topic always comes up in comparison with reverse osmosis systems. Reverse osmosis is a physical process from space travel for the production of chemically purest H2O. Here, pressure is used to reverse the natural osmosis process. Technically purest H20 is not the same as good drinking water! This process and also the chemically purest H20 produced from it do not occur in nature in this way. The purest H2O is rather pH-acidic and reacts chemically very aggressively. In nature, water evaporates over the sea, lakes and rivers. When it cools down and condenses again, it falls to earth as rain or dew. This water would still be quite low in minerals. But most people, animals and plants do not quench their thirst directly from rainwater.

However, as soon as water reaches the earth again, enters the groundwater and, in some cases, flows out of a spring again after many years, it has again become significantly enriched with minerals such as calcium, magnesium and sodium. This water is now more pH-neutral and no longer chemically aggressive. It is therefore biocompatible for us. Many reverse osmosis systems remove almost all of these good minerals. The drastic reduction of the above-mentioned electrical conductance is mostly due to this very fact. Then it was discovered that such strongly demineralised water is not so good for most people. Many alternative practitioners, but also sensitive people actually talk about "dead water" and "empty water" after such a procedure. This is why modern reverse osmosis systems now have a so-called remineralisation stage at the end of the purification chain. But if this would actually work, one would have almost the same conductivity values as before filtering. Remineralisation usually does not work.

CONCLUSION: Our filter does NOT change the mineral content of the filtered water!

5. What is the structure of the filtered water?

According to the latest alternative findings, the structure of the water is more important for living organisms than the conductance, pH value or minerals. With our filter, the water must flow very quickly through the ultra-fine carbon block. This leads to many micro turbulences, just like in nature. This seems to vitalise and energise the water and erase old information. These properties have been independently confirmed to us by various alternative working authorities.

6. Can the filter also be installed horizontally?

In most cases the supplied hoses (2x50cm) are long enough. This allows the filter to stand upright after installation in the cold water line. We recommend that you place the filter upright at least for the first 8-10 minutes of the rinse cycle. This allows unevenly distributed mineral mix from the first filter stage to be distributed more evenly around the carbon block. Afterwards, the filter can also be permanently installed in a horizontal position.

7. Can the filter be connected to low pressure lines?

Unfortunately no! Our MMS-Water-Filter needs the usual house water pressure of 3-4 bar to work properly.

8. Can the filter be connected to the hot water supply?

No! Our MMS-Water-Filter is only designed for connection to cold water.

9. can the filter be connected before the domestic supply?

Unfortunately no! Our MMS-Water-Filter is designed to be connected directly to the end of a cold water supply point. This is usually under the kitchen sink. Filters for the entire household supply are many times larger and more expensive than our filter.

10. Can the filter be connected to a private well?

Unfortunately no! Our MMS-Water-Filter is designed to be connected to a municipal water supply. On the one hand, a private well can have considerable amounts of suspended particles, which our 0.1 micron fine third filter stage would set very quickly. On the other hand, many private wells today have extremely high levels of contamination with nitrate, artificial fertilisers and pesticides. Unfortunately, more complex and expensive methods of drinking water treatment are necessary here.

CONCLUSION: We do not give any guarantee for the function and service life when operating at private wells!

11. We have other connections in our country! What now?

How can I still connect the filter? In DIY stores there are e.g. adapters from 3/8" to 1/2". With these adapters our MMS-Water-Filter can be connected and operated safely in your country.

12. Why is my filter clogged after only a few months?

Is my filter defective if the flow rate has been reduced significantly in a few months? Our MMS-Water-Filter has one of the finest pore sizes of 0.1 micron on the market. If the filter gets clogged very quickly, you will have an extraordinary amount of suspended particles in your water supply. This can happen once, for example, due to a large construction site in your street. Or this situation is permanent for you (e.g. old pipes in your street and house). In these cases it is often useful to have a standard 5-micron pre-filter placed in front of the entire house supply. Ask your local plumber about this. Our MMS-Water-Filter worked normally in this case and protected you from this dirt. The replacement cartridge must be replaced prematurely in these cases.

13. I am going on holiday for 4 weeks. Will this damage my filter?

No, you can enjoy your holiday! Our MMS-Water-Filter uses several germ stop techniques, so that even a break of 1-2 months can be bridged safely. Nevertheless, we would let the stagnant water flow out for 5-10 minutes after a longer break during the first use.

14. Why do I have a metallic taste after assembly?

Our filter does not contain any substances that can cause a metallic taste. Mostly, however, deposits such as rust and lime in the water pipe and tap are loosened during initial installation or when changing the cartridge. This can lead to a metallic taste. In this case, please unscrew the aerator at the tap and rinse for 5 minutes. Then screw a new aerator into the water tap.

15. Taste of drinking water

By the way, the human body knows very well by taste what is good for it and what is not. Spoiled food is very quickly recognised and rejected by its taste and smell. What is good for us, on the other hand, usually tastes particularly delicious. With our filter, you will want to drink the next glass right away. Our filtered water regularly receives top marks for its pure and fresh taste. Please also read the honest Trusted Shops experience reports of our satisfied customers on the product page. Without much advertising, our filter has quickly developed from a secret tip to a bestseller.